almex-admin

About almex-admin

This author has not yet filled in any details.
So far almex-admin has created 11 blog entries.

Aluminum-Lithium Alloys, Process Metallurgy, Physical Metallurgy, and Welding

New Publication! December, 2019 Did you know that Almex's Chief Technology Officer performed an editorial review for one of the latest and most comprehensive books on the Aluminum-Lithium alloys developments in the industry? "The authors have done a stupendous job in bridging the knowledge gap in theoretical understanding

Aluminum-Lithium Alloys, Process Metallurgy, Physical Metallurgy, and Welding2020-10-11T22:43:22-08:00

Gränges Improves Metal Quality with Almex LARS

Gränges Americas Improves Molten Metal Quality with Almex USA LARS® Degassing and Purification Systems Buena Park, California, USA - October 2019 – Almex USA Inc. has successfully commissioned four LARS® Degassing and Purification Systems for Gränges Americas Inc., a wholly owned subsidiary of Gränges AB, the world’s largest manufacturer of rolled products for heat

Gränges Improves Metal Quality with Almex LARS2020-10-11T08:06:46-08:00

Kobelco Holds Opening Ceremony for Casthouse in Bowling Green, Kentucky

Kobelco Holds Opening Ceremony for Billet Casthouse in Bowling Green, Kentucky September 2019 – Kobelco Aluminum Products & Extrusions (KPEX) held its Grand Opening Ceremony to celebrate the successful construction completion and operation of their Extrusion line, Fabrication line, and an Almex “Furnace to Finish” empowered hard alloy billet casthouse. During Phase I, which

Kobelco Holds Opening Ceremony for Casthouse in Bowling Green, Kentucky2020-10-24T11:43:47-08:00

Western Extrusions, Texas, Adding Complete Almex Billet Casthouse

FOR IMMEDIATE RELEASE: Buena Park, California, USA - August 2019 –Almex USA Inc. has announced its selection as the technology and equipment provider for the future casthouse of Western Extrusions Corporation of Carrollton, Texas, USA. Western is one of the leading independent aluminum extruders in North America and its Carrollton facility among the largest

Western Extrusions, Texas, Adding Complete Almex Billet Casthouse2020-10-11T11:54:17-08:00

Grupa Kęty Expands Casting Capabilities with Almex Billet Tooling Systems

Grupa Kęty Expands Casting Capabilities with Almex Billet Tooling Systems Buena Park, California, USA - March 2019 – Almex USA Inc. has successfully commissioned additional Billet Mold Tooling Systems for Grupa Kety, Poland. The project was commissioned and handed over in one week with Final Acceptance Testing completed on several alloys including

Grupa Kęty Expands Casting Capabilities with Almex Billet Tooling Systems2020-10-19T17:20:50-08:00

Always Up for the Challenge – Interview with Almex USA CEO: Ravi Tilak

While at the ALUMINUM USA trade show in Detroit, Michigan in November 2015, Light Metal Age had the opportunity to interview a number of notable members of the aluminum industry. This third interview in the series conducted by Ann Marie Fellom, publisher, presents Ravi Tilak, President and CEO of Almex USA, headquartered in Buena Park,

Always Up for the Challenge – Interview with Almex USA CEO: Ravi Tilak2020-10-11T11:05:33-08:00

Almex USA to Supply Complete Greenfield Casthouse to Kobe Steel Group

FOR IMMEDIATE RELEASE: Buena Park, California, USA - March 2017 - Almex USA Inc. has announced its selection as the technology and equipment provider for a U.S. subsidiary of the Kobe Steel Group. The new greenfield Casthouse facility, presently under construction in Bowling Green, Kentucky, will be owned and operated by Kobelco Aluminum Products & Extrusions

Almex USA to Supply Complete Greenfield Casthouse to Kobe Steel Group2020-10-11T11:06:15-08:00

Record-Breaking Greenfield Plant Installed & Commissioned in Lynwood, CA

LYNWOOD, California, USA - August 2007 -  Entire greenfield turnkey facility installed and commissioned by Almex in record breaking 14 months time at Universal Molding Company. Almex successfully commissioned a completely new DC Casthouse facility in Southern California at the UMC's Allocast plant in Lynwood, Los Angeles County. The plant is located on a 1½

Record-Breaking Greenfield Plant Installed & Commissioned in Lynwood, CA2020-10-11T11:15:01-08:00

Light Metal Age on LARS Improved Aluminum Refining System

LONG BEACH, California, USA - June 1999 - Improved Aluminum Refining System with In Situ Gas Preheating And SCADA capabilities The LARS Aluminum Refining System, designed by Almex, Long Beach, California, is now enhanced with a newly patented in-situ gas preheating device. It now comes with equipped with total SCADA capability. LARS is an acronym

Light Metal Age on LARS Improved Aluminum Refining System2020-10-11T10:53:50-08:00

Completion of Placement of Mega™ DC Casting Machine

BUENA PARK, California, USA - November 2006 - Mega™ Internally Guided Double-Acting Hydraulic Cylinder Installed in Southern California Almex USA Inc. completed the placement of an Almex Mega™ DC Casting Machine in a new Southern California, USA casthouse. The novel design includes a ceramic coated cylinder rod, unique internal guidance system and is available in

Completion of Placement of Mega™ DC Casting Machine2020-10-11T10:57:39-08:00

LARS RL-16 Continues Service at Jupiter Aluminum

HAMMOND, Indiana, USA - May 2007 -  Almex Restarts LARS RL-16 Liquid Aluminum Refining System to Jupiter Aluminum post refurbishment Almex today announced that the two degassing systems in production at Jupiter Aluminum have processed continuous metal supply for their production of continuously cast sheet and foil. The plant is able to enjoy long equipment

LARS RL-16 Continues Service at Jupiter Aluminum2020-10-11T11:02:33-08:00